Victaulic VE106 Groove-N-Go Operating And Maintenance Instruction Manual Download Page 6

Page: 6 / 35

VE106 Groove-N-Go Tool

TOOL NOMENCLATURE

NOTICE

• Drawings and/or pictures in this manual may be

exaggerated for clarity.

• The tool, along with this operating and maintenance

instructions manual, contains trademarks, copy-
rights, and/or patented features that are the exclu-
sive property of Victaulic Company.

Leg

Storage

Tubes

(3)

³⁄₈

-inch

Square-

Drive

Ratchet

Cart

Adjustable

Legs (3)

Safety Foot Switch

Safety-Foot-Switch

Storage Box

Drive Motor

Lower Roll/

Main Shaft

Upper

Shaft

⁄₈

-inch

Square Hole for

⁄₈

-inch

Square-Drive Ratchet

Overload
Device

Groove
Diameter
Stop

Body Nut

Feed Screw

Drive Socket

➀

Lower

Roll/Main

Shaft

Storage

➁

Groove

Depth

Gauges

Failure to follow instructions and warnings can result in
serious injury, property damage, or faulty installation.

• Before installing, operating, or servicing this tool, read and
understand the Operating Instructions and all warning
labels on this tool.

• Always wear safety glasses and foot protection.

If you have any questions about the safe operation of this tool,
contact Victaulic Tool Company, P.O. Box 31, Easton, PA 18044-0031,
610-559-3300.

0567 Rev.A

R031272LAB 3/99

Failure to follow in

truction

and warnin

can re

ult in

eriou

injury.

•  Before installing, operating, or
  servicing this tool, read and
  understand the Operating
  Instructions and all warning
  labels on this tool.

• Always wear safety glasses and foot protection.

If you have any questions about the safe operation of this tool,
contact Victaulic Tool Company, P.O. Box 31, Easton, PA
18044-0031, 610/559-3300

1532 Rev. A

R028226LBL

➁

➀

TM-VE106 3736 Rev_B.fm Page 5 Monday, May 9, 2005 12:02 PM

Summary of Contents for VE106 Groove-N-Go




































Search results

Summary of Contents for VE106 Groove-N-Go

Reviews:

Related manuals for VE106 Groove-N-Go

Brands by name

Popular brands

Victaulic VE106 Groove-N-Go, Operating And Maintenance Instruction Manual

Search results

Summary of Contents for VE106 Groove-N-Go

Reviews:

Related manuals for VE106 Groove-N-Go

Brands by name

Popular brands