Vicon Extra 532, Service Manual, Page: 52 / 90

Disassembling bevel gearbox
Disassembling bevel gearbox
Disassembling bevel gearbox
Disassembling bevel gearbox
Disassembling bevel gearbox
Disassembling bevel gearbox
Disassembling bevel gearbox
Disassembling bevel gearbox
Warning
: Disassembled shims,
must to be assembled in the
same positions.
• Unscrew bolts (21) and
disassemble cover (20).
• Disassemble oil seal (22),
using chisel and hammer.
Tools : Fork wrench n°13-17-19-
22, chisel, hammer, snap ring
pliers, pipe.
• Unscrew plugs (13),(24) and
empty the oil from gearbox.
• Disassemble cap (10) and oil
seals (2), using chisel and
hammer.
• Unscrew bolts (4),
disassemble cover (3).
• Disassemble snap ring (5)
and shim (6) from cover (3).
• Disassemble outer ring (7)
from cover (3), using pipe and
hammer.
4.7 Repair of Gearbox machine side
52