6
2.2
Display (Backside)
* Common to the separate and pole types.
2.2.1
Backside
2.2.2
Output connectors (when the connector cover is removed)
To remove the connector cover, unfasten the four screws fixing the cover.
Caution:
When the connector cover is removed, protect them against water. The output connectors are
not dust- and water-proof.
When the buzzer output is installed, or the relay output or RS422A output is used, protect the
output connectors also against water as they are exposed.
Connector cover
Balance cable
Jack for the AC adapter
Knob
(Used to adjust the
angle of the display)
Screws to fix the connector cover
DIN8P connector for peripheral device output
D-SUB9P male connector for RS232C output
