63
17.2
Common Specifications
(1) Weighing system
･････････････････
Tuning fork system
(2) Tare range
･･････････････････････
Full capacity
(3) Fluorescent display
･･･････････････
The FIP segment can display up to 8 digits.
The segment is 18 mm high, and displays 8 digits for a
weight.
Can display a bar graph of up to 40 bars and various
messages.
(4) Display when overloaded
･･････････
A series of dots [
] is displayed when the
weighing capacity is exceeded by 9 divisions.
(5) Pan dimensions
･･････････････････
400
×
350 [mm]
(6) Dust- and water-proof
･････････････
Dust and water resistant to IP65
*
(7) Output
･･････････････････････････
Bi-direction RS232C output
Output for peripherals
(8) Supported printer
････････････････
CSP-160, CSP-240
(9) Temperature and humidity ranges
･･
5 to 35°C, 80%RH or lower
(10) AC adapter
･･････････････････････
Dedicated AC adapter: DC12 V AC230 V
(11) Options
･････････････････････････
·
5 m PU cable (used to extend the balance cable)
·
10 m PU cable (used to extend the balance cable)
(These optional PU cables are only available for the
separate type.)
·
Hook for hanging
·
Battery option
·
Buzzer option
·
Limit contact output option
·
Full pack option
·
RS422 option
·
Pole kit for Separate type
* The balance is dust and water resistant to IP65 only when the connector cover is put on the
display.
IP65 is a class of dustproof and waterproof structure. The 6 in IP65 indicates that the structure
is completely dustproof, and the 5 indicates that the structure is resistant to water jets from all
directions.
Caution:
1.
Options other than the PU cables and the hook for hanging cannot be used in combination
with each other.
2.
When the RS422 option is selected, the D-SUB9P connector is replaced with an RS422
connector.
3.
When you weigh a sample by hanging it, be careful to prevent dust or water from entering
from the opening for the optional hook.
