Seeker HL User’s Guide
Document Num., Rev. 2
May 2018
Page 6
How this Manual is Organized
This manual is divided into the following chapters:
• Chapter 1, “General Information” provides contact information and describes how this
operation manual is structured.
• Chapter 2, “Seeker HL Introduction” introduces what the Seeker HL is and what it does.
This chapter discusses the practical application, connections and controls of the Seeker
HL. Finally, this chapter discusses the battery of the Seeker HL and how to update your
firmware.
• Chapter 3, “Seeker HL Operation” describes how to configure and operate the Seeker
HL.
• Chapter 4, “Leakage Testing” describes the steps needed to perform leakage testing
using the Seeker HL.
• Chapter 5, “Appendix” shows the technical specifications of the Seeker HL as well as
any error codes that may appear on the display screen of the Seeker HL.
Optional Software
Although the Seeker HL comes preconfigured and ready to use from the factory, the following
software is required for advanced configuration of the Seeker HL:
• Seeker Setup
is used to configure the Seeker HL, enabling the operator to assemble
files containing channel frequencies, squelch levels, and other settings. Users can
efficiently download configurations to one or more leakage detectors.
• Leakage Analysis Workshop (LAW)
is software that manages the storage and
retrieval of leakage information collected by vehicle mounted Seeker GPS systems.
Installed on a server, it receives leakage data uploads via the Internet/LAN, Wi-Fi
access point, or cellular connection. Data stored in LAW server may be displayed on
maps or as text, used to generate leakage work orders, or downloaded to other VIAVI or
third-party applications.
Data acquired by the Seeker HL must be manually entered into LAW, as the Seeker HL
does not communicate directly to LAW.