Seeker HL User’s Guide
Document Num., Rev. 2
May 2018
Page 15
A Guided Tour of Your Seeker HL
Front View
DISTANCE button
Press this button to change the distance from
value from 1 to 9 meters. 3 meters is normal
operation; 1 meter is near-field mode.
VOLUME button
Press this button to change the speaker volume
of the leakage tone. Brief presses increase the
volume to maximum and then it rolls over to the
minimum volume.
SNAPSHOT button
This button stores the current leakage value.
ON/OFF button
Press and hold this button to turn the Seeker
HL on or off. Also, when the meter is on,
briefly press this button to activate the display’s
backlight for approximately 60 seconds.
CHANGE button
Toggles or alters the current display selection.
SELECT button
Press to advance to the next display mode.