Seeker HL User’s Guide
Document Num., Rev. 2
May 2018
Page 21
Seeker HL Operation
Chapter 4
Available Configuration Settings
You must configure the settings of the Seeker HL using the Seeker Setup software. The
Seeker HL comes from the factory with default settings, but they may need to be customized
for your application. Detailed instructions can be found in the Seeker Setup Software Operation
Manual.
Feature
Available Values
Default Value
Device
Software
Display & Notification Settings
Set Display Units
uV/m, dBuV, dBuV/m
uV/m
NO
YES
Squelch
0.1 to 1000 uV/m
5 uV/m
NO
YES
Enable Meter Entry
Disabled or Enabled
Disabled
NO
YES
Input Level
60 or 40 dBmV
40 dBmV
YES
YES
Offset (dB)
20 to 60 dB
20 dB
YES
YES
Limit uV/m
0.1 to 1000 uV/m
0.1
NO
YES
Device Management
Technician ID
Custom Alphanumeric
trilithi
NO
YES
Update Firmware
N/A
N/A
NO
YES