manualshive.com logo in svg

Viavi Seeker HL, User Manual, Page: 13 / 36

Share
Download
Viavi Seeker HL User Manual Download Page 13

Seeker HL User’s Guide

Document Num., Rev. 2

May 2018

Page 13

Getting to Know Your Seeker HL

Chapter 3

Overview

Before using your instrument take a few minutes to familiarize yourself with the instrument, 

its basic conventions and its navigational tools. This section provides a brief overview of the 

instrument’s features, buttons, and controls.

Equipment Supplied with the Seeker HL

The Seeker HL comes with the following:

•  Seeker HL Leakage Detector
•  Dual-Band Frequency Matched Rubber Duck Antenna
•  Near Field Probe (NFP-1)
•  AC to DC Power Adapter & Battery Charger
•  USB Charge & Data Cable (Mini-B to Standard-A Male)
•  Protective Carrying Case
•  Shoulder Strap

Replacement Parts

The following replacement parts are available for the Seeker HL:

Part Number

Description

0610169006

AC to DC Power Adapter & Battery Charger with USB Charge/Data 

Cable

0610169002

AC to DC Power Adapter & Battery Charger without USB Charge/

Data Cable

2071585004

USB Charge & Data Cable

2131597000

Seeker HL Protective Carrying Case

0090048000

Seeker HL Battery

2072350001

Dual-Band Frequency Matched Rubber Duck Antenna

2010477000

Near Field Probe (NFP-1)

To place an order, contact your local VIAVI representative, call 1-844-GO-VIAVI, or visit 

https://www.viavisolutions.com/en-us/how-buy

.

Summary of Contents for Seeker HL





































Reviews:

No comments