Viavi ALT-8000 Getting Started Manual Download Page 10

Page: 10 / 39

ALT-8000 Getting Started Manual

Toxic Hazards (cont)

INPUT OVERLOAD LEVELS

BERYLLIUM COPPER

SOME MECHANICAL COMPONENTS

WITHIN THIS INSTRUMENT ARE

MANUFACTURED FROM BERYLLIUM

COPPER. THIS IS AN ALLOY WITH A

BERYLLIUM CONTENT OF

APPROXIMATELY 5%. IT REPRESENTS NO

RISK IN NORMAL USE.

THE MATERIAL SHOULD NOT BE

MACHINED, WELDED OR SUBJECTED TO

ANY PROCESS WHERE HEAT IS

INVOLVED.

IT MUST BE DISPOSED OF AS “SPECIAL

WASTE”.

IT MUST NOT BE DISPOSED OF BY

INCINERATION.

W A R N I N G

LITHIUM

A LITHIUM BATTERY IS USED IN THIS

EQUIPMENT.

LITHIUM IS A TOXIC SUBSTANCE SO THE

BATTERY SHOULD IN NO

CIRCUMSTANCES BE CRUSHED,

INCINERATED OR DISPOSED OF IN

NORMAL WASTE.

DO NOT ATTEMPT TO RECHARGE THIS

TYPE OF BATTERY. DO NOT SHORT

CIRCUIT OR FORCE DISCHARGE SINCE

THIS MIGHT CAUSE THE BATTERY TO

VENT, OVERHEAT OR EXPLODE.

UUT:RX MAXIMUM REVERSE POWER

100 mW

UUT:TX MAXIMUM POWER 300 W PEAK,

5 W AVERAGE

W A R N I N G

C A U T I O N

All manuals and user guides at all-guides.com

Summary of Contents for ALT-8000








































Search results

Summary of Contents for ALT-8000

Reviews:

Related manuals for ALT-8000

Brands by name

Popular brands

Viavi ALT-8000, Getting Started Manual

Search results

Summary of Contents for ALT-8000

Reviews:

Related manuals for ALT-8000

Brands by name

Popular brands