Viavi ALT-8000 Getting Started Manual Download

Page: 35 / 39

ALT-8000 Getting Started Manual

STEP

PROCEDURE

Fig. 16 Paused Altitude Rate / Manual Altitude Slew

NOTE:

To use the + and - buttons on the Slew Bar, buttons

must be pressed and held for a few seconds.

10 POWER REQUIREMENTS

The ALT-8000 is powered by a removable 14.8 v 6.6 Ah

Lithium Ion Battery. The battery charging circuit enables the

operator to recharge the battery anytime the unit is

connected to the AC Adapter. The ALT-8000 can operate

continuously utilizing the AC Adapter.
The internal battery is equipped to power the ALT-8000 for

four continuous hours of use. When the battery needs

charging the charge indicator illuminates a fast blinking

yellow. Closing the screen cover powers down the display.

The battery should be charged every three months

(minimum) or removed for long term inactive storage periods

of more than six months.

All manuals and user guides at all-guides.com

Summary of Contents for ALT-8000








































Search results

Summary of Contents for ALT-8000

Reviews:

Related manuals for ALT-8000

Brands by name

Popular brands

Viavi ALT-8000, Getting Started Manual

Search results

Summary of Contents for ALT-8000

Reviews:

Related manuals for ALT-8000

Brands by name

Popular brands