Viavi ALT-8000, Getting Started Manual

Page: 29 / 39

ALT-8000 Getting Started Manual
23
STEP PROCEDURE
Test Setup General Tab
RF Port:
Connection Type = Coupler (if using antenna
couplers) or Direct (connecting directly to LRU)
UUT Settings:
UUT Detection Mode = Auto
RF Settings:
Level Mode = Auto
Delay Settings:
AID Mode = Fixed
Fixed AID = Installation AID 0, 20, 40, 57 or 80 ft.
NOTE:
AID Only displayed when Connection Type is set to
Direct.
STEP PROCEDURE
Fig. 12 Test Setup Loss Tab Screen
Test Setup Loss Tab
Cable Loss:
UUT:TX Cable Loss = Figure in dB marked on TX
cable.
UUT:RX Cable Loss = Figure in dB marked on RX
cable.
All manuals and user guides at all-guides.com