Viavi ALT-8000, Getting Started Manual

Page: 13 / 39

ALT-8000 Getting Started Manual
10
1 SERVICE UPON RECEIPT OF MATERIAL
1.1 Unpacking
Special design packing material inside this shipping
container provide maximum protection for the Test Set.
Avoid damaging the shipping container and packaging
material when unpacking equipment; if necessary the
shipping container and packaging material can be reused to
ship the Test Set.
Use the following steps to unpack the Test Set:
STEP PROCEDURE
1. Cut and remove sealing tape on top of the shipping
container. Open shipping container and remove top
packing mold.
2. Grasp the Test Set firmly while restraining the shipping
container. Lift the equipment and packing material
vertically out of the shipping container.
3. Place Test Set and end cap packing on a flat, clean and
dry surface.
4. Remove protective plastic bag from the Test Set.
5. Place protective plastic bag and end cap packing
materials inside shipping container.
6. Store shipping container for possible future use.
1.2 Warranty Information
Warranty information for this product is available on the
VIAVI website at
https://www.viavisolutions.com/en-us/support/warranty-
quality-compliance-policies.
1.3 Checking Unpacked Equipment
Inspect equipment for possible damage incurred during
shipment. If Test Set has been damaged, report the damage
to VIAVI Customer Service.
Review packing slip to verify shipment is complete. Packing
slip identifies the standard items as well as purchased
options. Report all discrepancies to VIAVI
.
Contact: VIAVI
Attn: Customer Service
10200 West York Street
Wichita, Kansas 67215
Telephone: 800-835-2350
FAX: 316-529-5330
email: AvComm.Service@viavisolutions.com
All manuals and user guides at all-guides.com