Viavi ALT-8000 Getting Started Manual Download

Page: 7 / 39

ALT-8000 Getting Started Manual

Safety Symbols in Manuals and on Units

Equipment Grounding Protection

Improper grounding of equipment can result in electrical

shock.

Use of Probes

Refer to Performance Specifications for the maximum

voltage, current and power ratings of any connector on the

Test Set before connecting a probe from a terminal device.

Be sure the terminal device performs within these

specifications before using the probe for measurement, to

prevent electrical shock or damage to the equipment.

Power Cords

Power cords must not be frayed or broken, nor expose bare

wiring when operating this equipment.

Internal Battery

This unit contains a Lithium Ion Battery, serviceable only by

a qualified technician.

CAUTION

: Refer to accompanying

documents. This symbol refers to specific

CAUTIONS represented on the unit and

clarified in the text.
Indicates a Toxic hazard.

Indicates item is static sensitive.

AC TERMINAL:

Terminal that may supply

or be supplied with AC or alternating

voltage.

All manuals and user guides at all-guides.com

Summary of Contents for ALT-8000








































Search results

Summary of Contents for ALT-8000

Reviews:

Related manuals for ALT-8000

Brands by name

Popular brands

Viavi ALT-8000, Getting Started Manual

Search results

Summary of Contents for ALT-8000

Reviews:

Related manuals for ALT-8000

Brands by name

Popular brands