CE-C10-03-SMSP01-20220502 V1.0
2
1.3 Safety warning information
In order to ensure the safety of the patient and the operator, the following safety rules
should be strictly observed in the use of the wireless ultrasonic probe.
WARNI
NG:
1.
Do not disassemble the ultrasonic probe, which may cause electric
shock.
2.
Use the power cord supplied with this unit; use only the power supply
provided by US to supply power, the use of other specific power supply
(such as UPS, etc.) on the ultrasonic probe power supply may bring the
risk of electric shock.
3.
Use the probe carefully, if the probe is scratched with the contact
surface of the human body, immediately stop using the probe and
contact the service representative. If you use a scratched probe, there
is a risk of electric shock.
4.
Every time you use the instrument must be checked for safety, do not let
the probe by the impact of damaged ultrasound probe may cause the
patient to be shocked.
5.
Before performing an ultrasound check, check the surroundings to
ensure safe use within the environment. Do not operate the unit in an
environment with flammable or explosive liquids, vapors or gases such
as oxygen or hydrogen.
6.
Be sure to wear a sterile probe case on the probe when performing an
ultrasonic chamber check.
7.
Do not immerse the ultrasonic probe Type-C USB interface or above in
water or disinfectant. Because the Type-C USB interface of the
ultrasonic probe does not have a waterproof function, this may cause an
electric shock or a probe malfunction.
8
Before and after each inspection, you must ensure that the ultrasound
sound normal. A defective ultrasonic probe may cause the patient to be
shocked.
9
If the head part of the probe does not comply with EMC requirements, it
is forbidden to use the sound head for use in the body (as the device
may be adversely affected by other equipment).
