CE-C10-03-SMSP01-20220502 V1.0
36
CAUTION
：
1
If the probe will not power on after charging, it could indicate a battery
failure. Contact Support.
2
A non-medical grade power supply must be used outside of the patient
environment so that it is at least 1.5 meters from the patient.
3
The probe battery should be charged at least monthly to ensure proper
functionality.
4
It is normal that the probe may feel warm to the touch while charging. If you
remove the probe from the charging pad before or immediately after
charging is complete, it is recommended that you allow the probe to cool
down before use. Since the system limits patient contact temperature and
will not scan at or above 43°C (109°F), allowing the probe to cool down
before use will optimize scan time performance.
5
If the battery charge is too low (25% or less), you may not be able to
perform a study until the battery is recharged. Keep the battery fully
charged whenever possible.
