Viascope ipscan probe 600 User Manual Download Page 28

Page: 28 / 31

IPScan Probe 600 User’s Guide

3.1. Port Description

In order for IPScan to properly monitor and manage the network, IPScan uses below port

numbers. If your network has firewall and/or security related products, be sure to check if there

are conflicting ports in order to prevent any network problem.

Port No

Protocol

Description

6812

TCP

Upgrade IPScan Probe firmware using the upgrade program.

30000

TCP

IPScan Console to connect to IPScan Server.

30001

TCP

IPScan Probe to connect to IPScan Server.

30002

TCP

IPScan Server internal communication (Control Port).

30003

TCP

IPScan Server internal communication (Data Port).

30004

TCP

IPScan Console to connect to IPScan Server (Control Port).

30005

TCP

IPScan Console to connect to IPScan Server (Event Port).

TCP

Connect to IPScan Probe 500A using SSH.

TCP

Connect to IPScan Probe using telnet.

TCP

IPScan Server to connect to mail server using SMTP.

TCP

DHCP Server Bootstrap communication.

TCP

DHCP Client Bootstrap communication.

137

UDP

Probe to query NetBIOS protocol.

1433

TCP

IPScan Console and Server to connect to MSSQL.

1525

TCP

IPScan Console and Server to connect to Oracle.

3306

TCP

IPScan Console and Server to connect to MySQL.

Summary of Contents for ipscan probe 600
































Search results

Summary of Contents for ipscan probe 600

Reviews:

Related manuals for ipscan probe 600

Brands by name

Popular brands

Viascope ipscan probe 600, User Manual

Search results

Summary of Contents for ipscan probe 600

Reviews:

Related manuals for ipscan probe 600

Brands by name

Popular brands