IPScan Probe 600 User’s Guide
30
b
. Install the Probe to Trunk Port in multi VLAN environment
From the IPScan Console, each Ethernet Port will be shown as three different probes
[Monitoring Range] Configuration from IPScan Console
Host IP
VLAN ID
DHCP use
Port
Start
End
10.10.10.254 0
NO 1
10.10.10.1 10.10.10.254
10.10.20.254 1
NO 1
10.10.20.1 10.10.20.254
10.10.30.254 2
NO 1
10.10.30.1 10.10.30.254
10.10.40.254 0
NO 2
10.10.40.1 10.10.40.254
10.10.50.254 4
NO 2
10.10.50.1 10.10.50.254
10.10.60.254 5
NO 2
10.10.60.1 10.10.60.254
10.10.70.254 0
NO 3
10.10.70.1 10.10.70.254
10.10.80.254 7
NO 3
10.10.80.1 10.10.80.254
10.10.90.254 8
NO 3
10.10.90.1 10.10.90.254
If VLAN 0,3,6 are defined as Default VLAN, the VLAN ID should be [0]. Otherwise, VLAN ID
should be defined as its VLAN ID.
[LAN] Configuration from IPScan Probe
Ethernet
Port
IP Subnet
Gateway
Master
Server IP
VLAN
ID
Master
Port
Ethernet
Port 1
10.10.10.254 255.255.255.0 10.10.10.1 100.100.100.2 0
0
Ethernet
Port 2
10.10.40.254 255.255.255.0 10.10.40.1 100.100.100.2 0
0
Ethernet
Port 3
10.10.70.254 255.255.255.0 10.10.70.1 100.100.100.2 0
0
Backbone
VLAN 0 VLAN 1 VLAN 2
VLAN 3 VLAN 4 VLAN5
IPScan
Server
Database
Server
IPScan
Console
IPScan Probe 600
Trunk Port 802.1q
VLAN 0,1,2
VLAN 6 VLAN 7 VLAN8
Trunk Port 802.1q
VLAN 3,4,5
Trunk Port 802.1q
VLAN 6,7,8
Note
Note
