ViaSat Series 8345, Installation Manual

Page: 34 / 76

Chapter 2 - Installation
NOTE
Bolts must be oriented with nuts on top side because of
clearance considerations.
2. Attach three hub stabilizer braces to hub with 3/8-16 x 1 1/2-inch bolts, washers,
and nuts.
3. Attach right hand and left hand elevation pivot brackets to hub with 1/2-13 x 2
1/2-inch bolts, washers, and nuts.
CAUTION
The elevation axis pivot pins are designed with grease fittings
and are installed on the mount with grease fittings positioned
toward the inside of elevation pivot ears. This allows for
proper installation of elevation LSR drive bracket. Use care
not to damage grease fittings during installation.
4. Position right hand and left hand elevation pivot brackets over load frame ears
and install pivot pins and spiral retainer rings.
5. Torque all 3/8-16 hardware in step 2 to 30 ft-lbs (40 Nm).
6. Torque all 1/2-13 hardware in steps 1 and 3 to 75 ft-lbs (100 Nm).
42S199F
2-24