Chapter 2 - Installation
Chapter 2
Installation
2.1 General
This chapter contains procedures for unpacking and installing the Series 8345
4.5M Prime Focus Motorized Antenna. General safety precautions and
procedures are also described.
ViaSat thoroughly inspects and carefully packs all equipment before
shipment. At the time of shipment, the carrier assumes responsibility for its
safe delivery; therefore, do not return damaged units to ViaSat. Instead, file a
claim with the carrier as noted in the paragraphs following the initial
unpacking procedure given below:
1. Inspect shipping carton for visible damage.
2. Open the shipping carton.
3. Remove all packing material.
4. Inspect unit for visible damage.
5. Using packing list, check for missing items (see "How To Inventory Equipment
Received" below).
2.2 What to do About Visible Loss or Damage
Make a note of any loss or evidence of external damage on the freight bill or
receipt, and have it signed by the carrier's agent. Failure to adequately
describe such external evidence of loss or damage may result in the carrier
refusing to honor a damage claim. The form required to file such a claim will
be supplied by the carrier.
2.3 What to do About Concealed Damage
Concealed damage means damage which does not become apparent until the
unit has been unpacked. The contents may be damaged in transit due to
rough handling, even though the carton may not show external damage. If
you discover damage after unpacking the unit, make a written request for
inspection by the carrier's agent within 15 days of the delivery date, then file
a claim with the carrier since such damage is the carrier's responsibility. If
you follow these instructions carefully, ViaSat guarantees its full support of
your claims to protect you against loss from concealed damage.
42S199F
2-1
Summary of Contents for Series 8345
