ViaSat Series 8345, Installation Manual

Page: 14 / 76

Chapter 2 - Installation
2.7 General Electrical Safety Summary
These are general electrical safety precautions that are not related to any
specific procedure. These are recommended precautions that personnel must
understand and apply.
WARNING
Avoid shorting circuits when using metal tools. Some circuits
have high current capability which, when shorted, will flash
and may cause burns and/or eye injury.
Remove all jewelry and exposed metal objects from body and
clothing before performing maintenance, adjustments, and/or
troubleshooting. Before working inside the equipment, remove
all power, unless power is required to perform procedures. Do
not replace parts with power on.
Replacement of fuses or other parts must be done using
identical types and ratings. Substitution of non-identical parts
may cause safety and fire hazards.
Servicing this equipment may require working with protective
covers removed and ac power connected. Extreme caution
must be exercised during these procedures.
Death or severe injury may result if personnel fail to observe
safety precautions.
2.7.1 Resuscitation
Personnel working with or near hazardous chemicals or voltages should be
familiar with modern methods of resuscitation.
42S199F
2-4