Viadrus GRAND G 36, Manual For Operation And Installation

Page: 17 / 60

17
EN 12007-2 Gas supply systems – Pipelines for maximum operating pressure up to and
including 16 bar – Part 2: Specific functional recommendations for polyethylene
(MOP up to and including 10 bar)
EN 12007-3 Gas supply systems – Pipelines for maximum operating pressure up to and
including 16 bar – Part 3: Specific functional recommendations for steel
EN 12007-4 Gas supply systems – Pipelines for maximum operating pressure up to and
including 16 bar – Part 4: Specific functional recommendations for renovation
Č SN 38 6405 Gas equipments. Operating principles
Č SN 38 6462 Gas supply system - LPG - Pressure stations, distribution and consumption
Act no. 222/94 Coll. on the conditions of enterprise and public service performance in power industry
sector and on the state energy inspection
c) to the electrical network
Č
SN 33 0165 Electrical regulations. Marking the conductors with colours or digits.
Implementing regulations
.
Č
SN 33 1500 Electrical regulations. Electrical equipments revision
Č SN 33 2000-1 ed. 2 Low-voltage electrical installations – Part 1: Fundamental principles, assessment
of general characteristics, definitions.
Č SN 33 2000-4-41 ed. 2 Low voltage electrical installations - Part 4- 41: Protection for safety - Protection
against electric shock
Č SN 33 2000-5-51 ed. 3 Electrical installations of buildings – Part 5-51: Selection and erection of
electrical equipment – Common rules
Č SN 33 2130 ed. 2 Low-voltage electrical installations – Internal electric distribution lines
Č
SN 33 2180 Electrical regulations. Connection of electrical devices and appliances.
Č
SN 34 0350 ed. 2 Safety requirements for flexibile cords and cables
EN 60 335-1 ed.2 Household and similar electrical appliances – Safety – Part 1: General
requirements.
EN 60 335-2-102 Household and similar electrical appliances – Safety – Part 2-102: Particular
requirements for gas, oil and solid-fuel burning appliances having electrical
connections.
EN 60445 ed. 4 Basic and safety principles for man-machine interface, marking and
identification – Identification of equipment terminals, conductor terminations and
conductors
d) to the chimney
Č SN 73 4201 Chimneys and flue gas ducting– designing, implementation and connection of
fuel consumers.
e) regarding the fire regulations
Č SN 06 1008 Fire safety of heat installations.
EN 13501-1 + A1 Fire classification of construction products and building elements – Part 1:
Classification using test data from reaction to fire tests.
f) to the system of HWS heating
Č
SN 06 0320 Heating systems in buildings – Hot water preparation – Designing and planning
Č
SN 06 0830 Heating systems in buildings – Safety devices.
Č
SN 75 5409 Water installations inside buildings
8.2 Positioning possibilities
Boiler can be installed in the basic environment AA5/AB5 according to
Č
SN 33 2000-1 ed. 2. It must not be
installed in zones 0,1 and 2 according to Č SN 33 2000-7-701 ed. 2.
The boiler is equipped with a movable mains supply and a plug. The boiler must be according to EN 60 335 –
1 ed. 2 Art. 7.12.4 positioned in a way making sure that the plug is accessible.
The installation of the boiler must comply with all requirements of
Č
SN 06 1008.
Boiler positioning with regard to the fire regulations:
1. Positioning on the floor made of combustible material
−
Install the boiler on a incombustible thermally insulating pad exceeding the boiler ground-plan by
15 mm on all sides.
−
If the boiler is installed in a cellar we recommend its installation on a retaining wall at least 50 mm
high.