3022CS AUTOMATIC UNIT
4
1. GENERAL FEATURES OF THE MACHINE
The VIBEMAC 3022 machine is equipped whit an AUTOMATIC device to cut and unstitch at the required measure, the
two ends of a waistband fabricated by a border unit.
The Material Cutting, the Pneumatic 1 needle Unstitching and the Stitching Cycle Automatic Stopping functions are
executed by the LS01 PMG Digital Logic panel, while the Electronic Unstitch and the sewing speed control functions are
executed by the MITSUBISHI XL-CE servomotor with the new kind GMFY panel.
The user, through the LS01/M panel using software, programs the number of impulses ( + ¼ stitch resolution) required
for every counter, in order to obtain a complete waistband of the required features.
The material cutting device is made up by a shearer controlled by a special cylinder checked by a safety sensor.
The two unstitching devices can be:
- ELECTRONIC (standard): executes a movement of the material without there is the sewing cycle at the same time.
- PNEUMATIC (optional): is made up by a patented device that prevents the stitch fabrication.
The transport of the material is driven by a Step-by-Step motor, with the Auxiliary Feeder at different speed between the
two roller present and the length of the sewing stitch that can be chosen up to 5mm maximum.
1.1.SUPPLY TENSION
The supply tension is of 220V single-phase 50/60 Hz. The consumption is of about 740W.
1.2.CONSUMPTION AND PRESSURE OF THE COMPRESSED AIR
The consumption is of about 0.5 litres of air sucked with a cycle of almost six bars pressure.
1.3.DIMENSIONS AND WEIGHT
Width: 105 cm
Length: 60 cm Height: 125 cm Weight: 130 kg (about)
1.4.WORKING PLACE
The user works sits in front of the sewing machine with:
· the speed control pedal (1) placed at his feet, fixed at MITSUBISHI motor.
· the waistband guide Border units (2), fixed at his adjustable support, placed in front of the operator
· the Band guide (3), fixed at his adjustable support, placed in front of the operator
· the general current switch (4) at his right under the table, fixed at his support.
· the LS01 logic panel (5) at his right on the table.
· the sewing head with the working table (6) under the three control photocells.
1
5
3
2
4
6
3022 Unit
Summary of Contents for 3022 Series
Page 60: ...3022CS AUTOMATIC UNIT 60...
Page 61: ...3022CS AUTOMATIC UNIT 61...