3022CS AUTOMATIC UNIT
51
19.8.2.LENGTH OF MOVEMENT
Its purpose is to adjust the movement of the Spreader translation as wider as possible. The position of the eccentric
respect to the transversal shaft determines the lever arm and so the total shifting of the Spreader. Always place the fixing
screws of the eccentric as shown in the picture below and then shift the eccentric towards right or left. The correct value
of the measure is of 6mm between the left side of the eccentric and the transversal shaft.
Furthermore check if there is absence of play between the eccentric and the left shearing, block very well to avoid bad
working and oil leaking from the eccentric seals.
FRONT VIEW
Service hole
TOP VIEW
6 mm
Position of the First screw in
direction of rotation
Position of the second screw
in direction of rotation
0,5mm
Summary of Contents for 3022 Series
Page 60: ...3022CS AUTOMATIC UNIT 60...
Page 61: ...3022CS AUTOMATIC UNIT 61...
