3022CS AUTOMATIC UNIT
32
Press the button
D
to make the copying cycle start.. Keep it pressed until the writings flashes three time
On the display of the control panel appears:
9.2.8. LIST OF ERRORS
If during the working one of the following messages appears
:
switch the machine on and check the cause of the problem through the following steps.
Here is the complete list of the errors and the possible solutions:
Check if the feeding connector of the motor is properly connected.
Check the voltage of the line (Over voltage)
Check if the ENCODER connector on the motor panel is properly connected.
Check if the machine is not locked.
Check if the motor is not locked.
Check if the feeding connector to the motor panel is properly connected.
Problems with the INPUT signals (NOISE)
Check if there are not interferences in the INPUT signals to the software.
Check if the machine is not locked
Check if the synchronizer is connected
Check if the electro valves or the bobbins are not in short circuit.
Check if the synchronizer is connected
2 – 9 9
E - x
E - 1
E - 2
E - 3
E - 4
E - 6
E - 8
E - 9
Summary of Contents for 3022 Series
Page 60: ...3022CS AUTOMATIC UNIT 60...
Page 61: ...3022CS AUTOMATIC UNIT 61...