02/2017
www.vgebv.nl
14/18
Manual for:
VGE Pro UV Control 400/420/600 and VGE Pro UV Control 140/200
EP600001, EP200002
8 Main menu overview
System configuration and status information can be accessed via 'main menu'.
The accessibility of submenu is indicated by the icon in front of the menu item:
(accessible
a
/ not accessible r)
For access to system settings or software update is it required to be logged in.
exit -
Exit menu
show status
The submenu contains detailed information about occurred errors. If there is no error present the submenu remains
empty. A List of possible failure messages on chapter: troubleshooting
clear errors
This function clears previously recorded error messages e.g. lamp error (this menu will be left automatically)
UV hold
This function will freeze the measured UV value on display. The function is required for drinking water applications for
reference checks according to DVGW or OENORM.
Note: The function is only available if a digital UV-sensor is present, UV lamps are operating and warm up time
is expired.The UV hold function will be left automatically when the delay
‘max. UV hold time’ is expired.
login / logout
(default password: 0001)
Login for service access to system settings.
If you are already logged in you will logout by pressing the button ENTER.
settings
access to system settings (Log in for service access before.)
update
updating the firmware for base board and frontend via SD-card (Please contact VGE for further details)
date
- set date
time
- set time
display contrast
- change display contrast
language
– select language (default: English)
