02/2017
www.vgebv.nl
2/18
Manual for:
VGE Pro UV Control 400/420/600 and VGE Pro UV Control 140/200
EP600001, EP200002
1 Technical specification
standby power
5 W
THD current
30%
power factor
typical: 0.98 (min: 0.95)
power loss (lamps at 3 x 250 W)
typical: 5% (max. 8%)
ballast efficiency, all lamps on
typical: 95 % (min. 92%)
brownout/blackout detection
implemented, automatic lamp restart when appropriate
• duration for automatic restart: max. 500 ms
• automatic restart: 5x
measurement inaccuracy
typical: 3 % (max: 10%)
lamp operating current
nominal: 2.0 A (1.3 - 2.4 A)
lamp voltage
153 Vrms
ignition voltage (closed loop controlled)
2.9 kVpkpk / 1 kVrms
ignition duration
25 ms
lamp preheat current
nominal: 2.0 A (1.45 - 2.55 A)
lamp preheat time (nominal)
12 s
lamp restart on ignition failure
3x
duty frequency
operation: 25 – 55 kHz
preheating: 25 – 50 kHz
closed loop current control
on
closed loop power control
off
ambient temperature
all lamps at 250 W, mains 207 V AC: 0 °C (32 °F) - 50 °C (122 °F)
(to keep heat sink temperature below 80 °C (176 °F)
all lamps at 200 W, mains 230 V AC: 0 °C (32 °F) - 55 °C (131 °F)
ballast heat sink temperature
(overheating shutdown on exceeding)
80 °C (176 °F)
storage temperature
0 °C (32 °F) - 40 °C (104 °F)
cooling of unit
forced cooling using integrated fan
• internal fan lagtime: 1 min
IP protection cabinet
IP54
Altitude
2000 m above sea level
operating position
vertical, lamp terminals at bottom
lamp cable
4 wire
• cable length per lamp: max. 30 m
Wiring
see 'Wiring' on page 8 for details
EP2000002
EP600001
lamp type
Lamp VGE Pro T6 140W 867 SPT, Lamp VGE Pro T6
200W 1115 SPT
Lamp VGE Pro T6 140W 867 SPT, Lamp VGE Pro
T6 200W 1115 SPT
output power (limited to max. value)
1x 140 W (max. 1x200W)
3x 140 W (max. 3x250W)
1x 200 W (max. 1x200W)
3x 200 W (max 3x250W)
mains voltage
230 V AC ±10%, 45...65 hz
230 V AC ±10%, 45...65 hz
mains current (based on 10% losses)
with 1 x 140 W, 230 V AC
with 3 x 140 W, 230 V AC: 2.0 A
with 1 x 200 W, 230 V AC
with 3 x 200 W, 230 V AC: 2.9 A
with 3 x 250 W: max. 830W
mains power (based on 10% losses)
with 1 x 200 W, 207 V AC
with 3 x 250 W, 207 V AC: 4.0 A
dimensions
cabinet: 400 x 300 x 150 mm (15.74 x 11.82 x 5.91
inch)
cabinet: 450 x 300 x 210 mm (17.72 x 11.82 x
8.27 inch)
base unit with mounting frame: 300 x 250 x 84
mm (11.81 x 9.84 x 3.31 inch)
weight
8.5 kg (18.74 lbs)
10 kg (22.05 lbs)
