VGEM000-GB192
Pag. 44/68
VGE International B.V.
●
Ekkersrijt 4304
●
5692 DH Son Netherlands
●
+31 499 461099
●
●
www.vgebv.nl
Installation & User Manual
Placement of the UV lamp
Grasp the lamp by the base (1c) and guide it with the spacer
(1j) through the lamp socket (4, drawing 2, chapter 'Lamp
socket assembly') into the quartz tube (11, drawing 2,
chapter 'Lamp socket assembly').
Due to the difference in size in the lamp
contacts (1d and 1e), the lamp only fits
into the socket in one way. Make sure
that the contacts match the openings in
the socket (see also drawing 10).
If the lamp is fully inserted and the ceramic base touches to the O-ring all around (3, drawing 2, 'Lamp
socket assembly' chapter), the lamp be secured via the "bayonet closure". Turn the lamp clockwise until it
stops. There is an embossed arrow on two sides on the edge of the ceramic base. With correct locking, the
arrow corresponds to the closed lock on the socket. (see drawing 12).
Drawing 39
Drawing 10
