VGEM000-GB192
VGE International B.V.
●
Ekkersrijt 4304
●
5692 DH Son Netherlands
●
+31 499 461099
●
●
www.vgebv.nl
Pag. 33/68
Installation & User Manual
To ensure that the face is protected from UV radiation, we recommend that you
use a polycarbonate face shield in addition to good, fully covering clothing. You
can order this from us.
4.6.4 Gloves
The VGE Pro MP UV systems are equipped with medium pressure UV lamps and
quartz tubes, the quartz parts must be clean when they are put into operation.
If a UV lamp comes in contact with the skin, traces of grease remain on the lamp.
When the UV lamp is switched on, the traces of grease that remain behind block
the light that wants to shine out of the lamp. Because light is converted to heat, it
will become very hot at the location of the fat (or other contamination) and the lamp
will burn out at this location.
To prevent the UV lamps from being grabbed with bare hands, a set of white fabrics
and lint-free gloves are supplied as standard with every delivery of a new UV
system. If these gloves are worn or dirty, new ones can be ordered with article
number: B299800
4.6.5 Torque screwdriver
To be able to mount the ceramic lamp socket correctly, the screws must be tightened with a specified
torque. If the correct torque is used, the ceramic lamp socket will not be damaged and the seal will get
sufficient pressure to properly seal the irradiation chamber.
The torque screwdriver can be ordered from us with the article number: SP0058
