VGEM000-GB192
VGE International B.V.
●
Ekkersrijt 4304
●
5692 DH Son Netherlands
●
+31 499 461099
●
●
www.vgebv.nl
Pag. 15/68
Installation & User Manual
2 Safety instructions
Be sure to read and understand the instructions and instructions in this section
carefully before the UV system is installed and commissioned.
2.1 Intended use
The VGE Pro UV systems have been developed for irradiating liquids with a low viscosity such as water.
Irradiating a liquid with UV radiation serves as disinfection, photolysis or as an activator of an AOP
(Advanced Oxidation Process). The VGE Pro UV systems are intended for the treatment of liquids that are
permeable to UV-C radiation.
The VGE Pro UV systems may not be used for applications other than those mentioned above.
The operational safety of a VGE Pro UV system is only guaranteed if it is used as intended for the specific
application. The VGE Pro UV system may only be used in accordance with the purpose specified in the
order and within the technical specifications of the relevant system. The VGE Pro UV systems may only be
used in non-standard applications after consultation with and with the written approval of VGE International
B.V .
Compliance with the intended use also includes reading this manual and complying with all instructions it
contains. In addition, all inspection and maintenance work must be carried out at the prescribed intervals.
The user of a VGE Pro UV system bears full and exclusive responsibility if this device is used for any use
that does not strictly and exclusively meet this intended use.
2.2 Safety instructions
VGE International B.V. values great importance to safety when working with or on a VGE Pro UV system,
safety measures are therefore integrated in the design.
The safety instructions in this manual must be followed at all times, but they do not
affect the local and/or legally applicable safety measures and instructions.
The VGE Pro UV systems have been developed according to the latest state of the
art taking into account the applicable safety standards. However, if a UV system is
used by non-trained personnel or if the manual has not been fully read and
understood by operating personnel, there may be danger to the body and members
for the personnel or third parties concerned, and the UV system may also be
damaged.
Installation and maintenance as well as work that is not described in this manual
may only be carried out by trained and authorized technical personnel.
The relevant supervisor of the entire system is responsible for ensuring that only
trained and authorized personnel may work on and with the UV system within their
responsibility.
Trained and authorized technical personnel means:
- Installation: Technical staff trained and authorized by VGE International B.V. or a
hydrotechnical engineer;
