VESPA GTS Supertech 300 hpe Manual Download

Page: 122 / 128

06_02

Recommended products (06_02)

Piaggio Group recommends the use of products from its Castrol official partner
for the scheduled maintenance of its vehicles.

Only use lubricants and fluids which meet or exceed the performance characteristics
specified. This also applies when topping up only.

TABLE OF RECOMMENDED PRODUCTS

Product

Description

Specifications

Engine oil 5W -40

Synthetic-based lubricant for four-stroke
engines.

SAE 5W-40; JASO MA, MA2; API SL; ACEA
A3

Transmission oil 80W-90

Lubricant for gearboxes and transmissions.

SAE 80W-90 API GL-4

Anti-freeze liquid, ready to use, colour red

Ethylene glycol antifreeze liquid with organic
inhibition additives. Red, ready to use.

ASTM D 3306 - ASTM D 4656 - ASTM D 4985
- CUNA NC 956-16

Brake fluid DOT 4

Synthetic brake fluid.

SAE J 1703; FMVSS 116; ISO 4925; CUNA NC
956 DOT4

Water repellent spray grease

Water repellent pouring calcium spray grease. White, soap base spray grease with NLGI 2

Calcium complex; ISO-L-XBCIB2

122

6 Scheduled maintenance

Summary of Contents for GTS Supertech 300 hpe

































































































































Search results

Summary of Contents for GTS Supertech 300 hpe

Reviews:

Related manuals for GTS Supertech 300 hpe

Brands by name

Popular brands

VESPA GTS Supertech 300 hpe, Manual

Search results

Summary of Contents for GTS Supertech 300 hpe

Reviews:

Related manuals for GTS Supertech 300 hpe

Brands by name

Popular brands