manualshive.com logo in svg

VESPA GTS Supertech 300 hpe, Manual

Share
Download
VESPA GTS Supertech 300 hpe Manual Download Page 104

CAUTION

NEVER WASH THE SCOOTER IN DIRECT SUNLIGHT, ESPECIALLY IN SUMMER
WHEN THE BODYWORK IS STILL HOT AS THE SHAMPOO COULD DAMAGE
THE PAINTWORK IF IT DRIES BEFORE BEING RINSED OFF. NEVER USE
CLOTHS SOAKED IN ALCOHOL, PETROL, DIESEL OIL OR KEROSENE FOR
CLEANING THE PAINTED OR PLASTIC SURFACES, IN ORDER NOT TO DAM-
AGE THE LUSTRE FINISH OR ALTER THEIR MECHANICAL PROPERTIES. US-
ING SILICONE-BASED WAX CAN DAMAGE THE PAINTED SURFACES, DE-
PENDING ON THE VEHICLE COLOUR (SATIN COLOURS). FOR FURTHER
INFORMATION ON THIS MATTER, CONTACT AN AUTHORISED SERVICE CEN-
TRE.

WARNING

CLEAN YOUR SCOOTER FREQUENTLY SO AS TO AVOID POSSIBLE DIRT OR
MUD DEPOSITS THAT COULD CAUSE MALFUNCTIONING IN THE THROTTLE
GRIP TRANSMISSION AND/OR OTHER COMPONENTS.

CAUTION

DURING VEHICLE CLEANING, WITH WATER JET UNDER PRESSURE, KEEP
THE SADDLE CLOSED, AVOIDING TO DIRECT THE JET IN THE HELMET COM-
PARTMENT.

104

3 Maintenance

Summary of Contents for GTS Supertech 300 hpe

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands