VESPA GTS Supertech 300 hpe, Manual

Page: 85 / 128

N.B.
IF THE ENGINE COOLANT WARNING LAMP ILLUMINATES WHILE RIDING,
TURN THE ENGINE OFF IMMEDIATELY AND LEAVE IT TO COOL. THEN CHECK
THE COOLANT LEVEL; IF THE LEVEL IS INCORRECT, CONTACT AN AUTHOR-
ISED SERVICE CENTRE.
NEVER REMOVE THE EXPANSION TANK CAP WHILE THE ENGINE IS HOT.
03_14
03_15
Check coolant when the engine is cold as indicated in the scheduled maintenance
table, following the steps below.
1 . Rest the vehicle upright on the stand and remove the screw « A » of the expansion
tank cap shown in the photograph.
2 . Check the fluid level that should always be between the «MIN» and «MAX» level
« B » on the tank.
4 . If necessary, perform the top up, with the engine cold, in the case that you find the
liquid is too close to the minimum level.
If the coolant needs to be topped up frequently or the expansion tank is completely
dry, check the cooling system to find the cause of the problem. It is essential to have
the cooling system checked at an
Authorized Service Center . Replace coolant as
indicated in the scheduled maintenance table. This operation must be carried out at
an
Authorized Service Center .
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
85
3 Maintenance