manualshive.com logo in svg

VESPA GTS Supertech 300 hpe, Manual

Share
Download
VESPA GTS Supertech 300 hpe Manual Download Page 67

02_10

Running in (02_10)

WARNING

DURING THE FIRST 1,000 KM DO NOT RIDE THE VEHICLE OVER 80% OF ITS
MAXIMUM SPEED. AVOID TWISTING THE ACCELERATOR KNOB COMPLETE-
LY AND/OR KEEPING A CONSTANT SPEED FOR LONG PERIODS OF TIME.
AFTER THE FIRST 1,000 KM, GRADUALLY INCREASE SPEED UNTIL REACH-
ING THE MAXIMUM PERFORMANCE.

02_11

Starting up the engine (02_11, 02_12)

The vehicle is equipped with a system connected to the side stand which inhibits en-
gine starting when the side stand is extended. The engine cannot be started if the side
stand is extended, and stops if the side stand is extended while the engine itself is
running.

To start the engine, place the vehicle on the centre stand, ensuring the rear wheel is
not touching the ground.

Turn the ignition switch to "

ON

" the engine management indication light will switch on.

67

2 Use

Summary of Contents for GTS Supertech 300 hpe

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands