manualshive.com logo in svg

VESPA GTS Supertech 300 hpe, Manual

Share
Download
VESPA GTS Supertech 300 hpe Manual Download Page 47

WARNING

 

THE ASR SYSTEM IS ACTIVATED AT EVERY "ON" POSITIONING OF THE IGNI-
TION SWITCH.

IF DISABLED BY THE USER, THE ASR SYSTEM KEEPS THE STATE OF INAC-
TIVITY ONLY IF THE VEHICLE IS OFF, BY USING THE ENGINE STOP SWITCH;
AT THE NEXT KEY ON THE ASR SYSTEM IS ENABLED AUTOMATICALLY.

CAUTION

IT IS EMPHASISED THAT THE RIDING AUXILIARY SYSTEM CANNOT CHANGE
THE PHYSICAL LIMITS OF GRIP AND IS NOT A SUBSTITUTE FOR PROPER
MANAGEMENT OF POWER, BOTH ON STRAIGHT STRETCHES AND IN TURNS.
THEREFORE, IT IS RECOMMENDED TO ALWAYS USE THE VEHICLE WITH THE
UTMOST CARE AND IN ACCORDANCE WITH THE REGULATIONS IN FORCE.

CAUTION

AT LOW SPEED, LESS THAN 5 Km/h (3 mph), THE ASR SYSTEM IS NOT OP-
ERATIONAL.

IT IS RECOMMENDED TO PAY PARTICULAR ATTENTION IN THE EVENT OF
ACCELERATION FROM STANDSTILL IN CONDITIONS OF LOW GRIP, ESPE-
CIALLY IN THE FIRST METRES.

N.B.

IN CASE OF ROAD DISCONNECTIONS THERE COULD BE SHORT ACTIVA-
TIONS OF THE ASR SYSTEM. SUCH EVENT APPEARS UNDER NORMAL OP-
ERATION CONDITIONS OF THE VEHICLE.

47

1 Vehicle

Summary of Contents for GTS Supertech 300 hpe

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands