manualshive.com logo in svg

VESPA GTS Supertech 300 hpe, Manual

Share
Download
VESPA GTS Supertech 300 hpe Manual Download Page 88

Use of a new battery

Ensure that the terminals are connected correctly and check voltage.

CAUTION

DO NOT REVERSE THE POLARITY: RISK OF SHORT CIRCUIT AND DAMAGE
TO THE ELECTRICAL SYSTEM.

WARNING

USED BATTERIES ARE HARMFUL FOR THE ENVIRONMENT. COLLECTION
AND DISPOSAL SHOULD BE CARRIED OUT IN COMPLIANCE WITH REGULA-
TIONS IN FORCE.

03_20

Long periods of inactivity (03_20)

If the vehicle is not used for a long time, the performance of the battery will deteriorate.
This is the result of the natural phenomenon of battery discharging, and may be due
to residual absorption by vehicle components with constant power consumption. The
deterioration of the battery's performance is also the result of environmental conditions
and how clean the terminals are. To avoid any starting difficulties and/or irreparable
damage to the battery, you should do the following:

- 

At least once a month

 start up the engine and turn it over at a speed slightly above

idling, for 10-15 minutes. This will enable you to keep all the parts of the engine in
working order as well as the battery.

- Take your vehicle to a garage (as indicated in the «Vehicle not used for extended
periods» section) to have the battery removed. The battery must be cleaned, fully

88

3 Maintenance

Summary of Contents for GTS Supertech 300 hpe

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands