20
User Manual 10H52267UM60 - Rev. 1 - 09/2018
EXS
2.4
Unpacking
Unpack the UPS and battery packages under the supervision of an authorized service engineer.
Steps:
1. Use a pair of cutters to remove the packing strap, and remove the honeycomb board, as shown in Figure 2-2.
Figure 2-2
Removing packing strap and honeycomb board
2. As shown in Figure 2-3, remove the carton (I, II, III), wrapping film, and protective cardboard from the four corners.
Figure 2-3
Removing protective cardboard
3. Open the front panel of the built-in battery compartment, loosen the fixing screws and remove the bottom section
secured at the front of the cabinet. Then, loosen the fastening screws and remove the bottom section secured at the
rear of the cabinet. As shown in Figure 2-4.
