EXS
User Manual 10H52267UM60 - Rev. 1 - 09/2018
23
2.7
Mechanical Requirements
2.7.1
Moving the Cabinet
Warning
1. Ensure that the load capacity of the lifting equipment used to move the UPS cabinet is sufficient. Refer to Table 10-3 for weight
information.
2. Due to the weight of the UPS cabinet, the castors may only be suitable for use on flat surfaces.
3. The centre of gravity of the UPS cabinet is high, take care to prevent it tipping over when moving it
4. The cabinet must never be suspended vertically.
Caution
When transporting the UPS complete with internal batteries, secure each individual battery string separately and keep the
movement distance to a minimum.
2.7.2
Clearance
Because the UPS is not fitted with lateral grilles, there is no special clearance requirement on either side.
In addition to any local regulations, in order provide sufficient space for routine operations, such as tightening the
power terminals inside the UPS, it is recommended that clearance around the front of the UPS be at least 1200 mm.
2.7.3
Cable Access Mode
For a detailed description, refer to 3.1.8 Power Cable Connection Steps and 3.2. Wiring the Signal Cables.
