EXS
User Manual 10H52267UM60 - Rev. 1 - 09/2018
47
Figure 5-6
Bypass normal interface
Figure 5-7
Bypass mode flow chart page
With the UPS In Inverter mode, press and hold the power button. If the bypass is abnormal, then the interface shown in
Figure 5-8 will appear, select 'NO' to shut down the UPS output.
Figure 5-8
Bypass abnormal interface
5.3.3
Switching From Bypass Mode To Normal Mode
In Bypass mode, press the power button so that the dialogue box shown in Figure 5-9 appears on the LCD screen.
After selecting 'YES', the inverter performs the self-check and start-up. Once the inverter is running normally, the UPS
will switch to normal operating mode and the run indicator will remain on in the steady state.