Mechanical Installation
Vertiv | Liebert CRD10 | User Manual
44
2.
Mount the valve body horizontally in the refrigerant pipe as shown in Figure 3-20. Pay attention to the
arrow on the valve body as the arrow indicates the flow direction of the refrigerant in the valve. Ensure
that the arrow points towards the indoor unit. The connection pipe diameter of the valve body is
12mm(1/2inch).
Figure 3-20 Installing the Solenoid Valve Horizontally
3.
After brazing, install the coil and the wiring terminals. Figure 3-21 shows the process of connecting the
cables and coil of the solenoid valve.
Figure 3-21 Install the coil of the Solenoid Valve
4.
Finally, as shown in Figure 3-22, clip the valve body coil, press the coil tightly to ensure full contact
between the coil and valve body.
Figure 3-22 Fixing the Coil
