Mechanical Installation
Vertiv | Liebert CRD10 | User Manual
37
Install bolts in the four holes at the bottom to fix the cabinet onto the floor bracket of the equipment
room. Install bolts in the four holes at the top to fix the cabinet to connect the cabinet with the top
bracket of the machine room.
3.7
Cabinet Connection
The cabinet connectors come along with the accessories. Connect the unit with adjacent cabinets using
the cabinet connectors. Refer the following procedures for connecting the cabinet.
NOTE: Before connecting the cabinet, level the cabinet as mentioned in the earlier section (for more
details, refer to section 3.6
.1 “Leveling the Cabinet”).
1.
Loosen the fixing screw of the cabinet connector on the frame of the cabinet. Rotate the cabinet
connector to 90° horizontally. Use M5 countersunk head screws to fix it on the cabinet frame (side of
the door lock) as shown in Figure 3-12
.
Figure 3-12 Rotating the Cabinet Connector
2.
Use the M5 countersunk head screws to fix the cabinet connector (L-shaped) in the installation holes
of the cabinet frame (side of the hinge) and rack frame adjacent to the cabinet as shown in Figure 3-13.
Figure 3-13 Schematic Diagram for Connecting the Cabinet
3.
Repeat step 1 and 2 to Install the other 6 cabinet connectors based on the same method.
Cabinet connector
Cabinet
connector
A
Mounting screw M5×12
Cabinet connector
A amplified
