Installation
Vertiv | Liebert CRD10 | User Manual
16
2.2
Installation Tools
Table 2-1 shows the standard tool sets and utilities used in the installation and maintenance process:
Table 2-1 Standard Tool Sets
Name
Drawing
Name
Drawing
Electric hand drill
Adjustable wrench
Slotted screwdriver
Cross head screwdriver
Stepladder
Forklift
Drill
Wire cutting pliers
Claw hammer
Diagonal cutting
pliers
Insulating shoes
Antistatic gloves
Electrician knife
Cable ties
Insulating tape
Insulating gloves
Crimping pliers
Heat shrinkable tube
Insulated torque wrench
Torque screwdriver
Multimeter
Clip-on ammeter
The tools mentioned in Table 2-1 are standard and commonplace; however, depending on various factors such
as site environment, cables, installation equipment, and on-site electrical connections these tools may vary in a
real-time scenario.
•
Fasteners
The fasteners are shown in the Figure 2-1.
Figure 2-1 Fasteners
Floating nut
M5 countersunk head screw
M6 panel screw
M6 panel head screw Cable tie fixture kit
