Vertical TeleVantage 7.5, Install Manual

Page: 134 / 180

B-8 I
NSTALLING
I
NTEL
T
ELEPHONY
C
OMPONENTS
Sample trace output
The following sample output was generated by running TVDTrace.exe and PRITrace. It shows
TeleVantage sending out calling id as part of the ISDN setup message. It sends Calling Name
as DISPLAY(0x28) and calling number as CALLING PARTY NUM(0x6c).
Time Stamp : 7/25/2003, 17:28:10.638
TRANSMIT
Command=0 SAPI=0x00
TEI=0x00
0x5a 0xe2 Information
Dest=0 CR=0x150b
SETUP(0x05)
1: BEARER CAPABILITY(0x04)
2: IE Length(0x02)
3: 1------- Extension Bit
-00----- Coding Standard
---00000 Info. Transfer Cap.
4: 1------- Extension Bit
-00----- Transfer Mode
---10000 Info. Transfer Rate
1: CHANNEL ID(0x18)
2: IE Length(0x03)
3: 1------- Extension Bit
-0------ Interface ID Present
--1----- Interface Type
---0---- Spare
----1--- Preferred/Exclusive
-----0-- D-Channel Indicator
------01 Info. Channel Sel.
3.2: 1------- Extension Bit
-00----- Coding Standard
---0---- Number Map
----0011 Channel/Map Element
4: 1------- Extension Bit
-0010101 Channel Number/Slot Map
>>>> Start of outbound ID
1: DISPLAY(0x28)
2: IE Length(0x0d)
Vertical, Inc Display Information
1: CALLING PARTY NUM(0x6c)
2: IE Length(0x0c)
3: 0------- Extension Bit
-010---- Type Of Number
----0001 Numbering Plan ID
3a: 1------- Extension Bit
-00----- Presentation Indicator
---000-- Spare