Vertical SBX IP 320, Installation Manual

Page: 28 / 148

KSU Installation 3
-
10
Chapter 3: KSU Installation
SBX IP 320 Installation Guide
Caution:
• It is recommended that you use an external backup battery fuse (5A @ 250V) between
the battery and the System.
• Recommended battery capacity is 24V/20AH MF; the SBX IP 320 System should be able
to operate more than 3 hours with batteries that are in good condition.
• Carefully check the battery polarity with cable colors (Red and Blue) when connecting
the battery to the System.
• Make sure that you do not short out the external batteries and cables.
• There is a danger of explosion if external batteries are incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
KSU Mounting
Wall Mounting
1. Install 3 anchor plugs in the wall using the mounting template included for accurate
placement Figure 3-4.
2. Attach the mounting template with the 3 included screws to the 3 anchor plugs.
3. Hook the KSU onto the screws, making sure that the System slides down securely Figure
3-5.