Vertical SBX IP 320, Installation Manual

Page: 119 / 148

[Connection] Menu 9
-
19
Chapter 9: Remote Diagnostics
SBX IP 320 Installation Guide
[LAN Configure] Sub-menu
[LAN Configure] is for configuring the destination IP address that is to be connected to the SBX
IP 320 system.
• Conditions:
• When the LAN connection is established, user cannot select this menu. The menu item is
disabled in that case.
• Setting values are stored for the next session at which they are automatically restored and
used. But only one IP address will be saved.
Procedures:
1. Select the [LAN Configure] sub-menu in the [Connection] menu. The [LAN
Configuration Dialog] appears.
2. Enter the destination IP address.
3. Click the [OK] button.
[LAN Connect] Sub-menu
[LAN Connect] connects the PC and SBX IP 320 system with the IP address setting from [LAN
Configure].
Conditions:
• If the connection fails, an error message appears. It means that the IP address is not valid
or the SBX IP 320 system does not have an IP address or there are some errors.
• If the connection is established successfully, a message will display in the [Display Area].
The success of connection means that the connection between this program and the NIC
of the PC succeeded. This does not mean the connection between this program and the
SBX IP 320 system succeeded.