Vertical SBX IP 320, Installation Manual

Page: 126 / 148

[Commands] Menu 9
-
26
Chapter 9: Remote Diagnostics
SBX IP 320 Installation Guide
The [db] command's detail information is displayed below.
db cc - Configuration Constraint
db pf - Pre-Programmed Fault
db ts - Time-Slot Conflict
db ht - Hiway TestPre-Programmed Fault
db dt - DTRU Test
db ct - CPTU Test
db mt - Memory Test
db rt - RTC Test
db pc - Power Capacity
db rc - RGU Capacity
de hs - HDLC Status
dr [is/ic] - ISDN Line Status
dr [ri/rc] - Reset Information
dr li [d/c/v/a] - Resource Assignment
Monitor - Set Board Trace
Sets trace for board in slot xx.
For setting trace for board in slot 7:
mon>t b 07
Monitor - Delete Trace Info
Deletes all current trace commands and revert to idle condition.