Vertical 9133i User Manual Download

Page: 125 / 224

Vertical SIP Phones 480i/CT and 9480i/CT

About Wave SIP Phones

Wave Phone User Guide

Feature Keys & Functions

Feature

Used to …

Speaker

Hear the other party during a call without using the handset or headset (Speaker
Mode).

Handset

Answer or place an internal or external call.

Hold Button

Place a call on hold and keep the party connected while you hang up the handset
or use other phone features.

Redial Button

Place a call to the last phone number you dialed from your phone.

Goodbye Button

Disconnect the current call.

Options Button

Access a list of configurable options (such as time & date, ring tone, and so forth.
See page 5-30.

Display

Provide information about what is happening on your phone.

Softkeys (6)

Make selections from the display. On this model, one of the softkeys is the

Flash

button which is used to access various functions, and work with feature codes.

Scroll and Select Buttons

Scroll through menu options and select items shown on the display. See page
5-27.

Icom (

) Button

Make calls from your phone to another extension within your phone system.

Services Button

Access the Callers and Directory lists.

Microphone

Speak to a caller when using the speaker instead of holding the handset.

Line Appearance Buttons (4) Make and receive external calls without entering an external access code; one or

more line appearances may be assigned to your phone.

Conf (

)Button

Set up a call between multiple parties, both internal and external.

Xfer (

)Button

Place a call on hold while you dial the destination extension number.

Volume Up

(

)

Button

Increase the volume of the speaker or the handset during a call.

Mute (

)

Button

Prevent the distant party from hearing any conversation at your end.

Speaker/Headset (

) Button Toggle between Speaker and Headset modes to hear a caller instead of holding

the handset.

Volume Down (

) Button

Decrease the volume of the speaker or the handset during a call.

Headset (auxiliary) Jack

Speak to a caller when using a headset instead of holding the handset.

Wave 4.0

June 2013

Summary of Contents for 9133i

































































































































































































































Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands

Vertical 9133i, User Manual

Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands