Page
3
-
51
Using Wave Phone Features
Wave Phone User Guide
Page
The Page feature can operate in one of two ways: the Page button gives you access to the public
address system and all the phone speakers on your system, or pages only a specific zone (group)
of phones.
Making and receiving a SIP page
•
When you initiate a page from phone, a confirmation tone alerts you when the system is
ready to broadcast paging.
•
When you receive a page, an alert tone signals that page playback is about to begin.
•
When an SIP phone is receiving a page, incoming calls will not be audible until the page
is complete. The user may answer the incoming call and the page announcement will
cease.
•
When an SIP phone user initiates a page to a zone they are part of, that user will not hear
the page.
•
A SIP phone user can initiate a call while receiving a page announcement. The page
announcement will cease to that phone when the user places a call.
Paging the Entire System [ALL]
Hint:
Telephones receiving a page on the phone speaker can press
SPEAKER
to disconnect the
phone from the paging service.
SIP PHONES
To Page All Phones with Speakers
1.
Press
Intercom
(
).
If your phone does not have an
Intercom
button as shown above, dial *11.
2.
Make an announcement.
3.
Hang up or press
End Call
when you are finished making your announcement.
For 480i/CT, 9480i/CT, and all Aastra Series 5 models: press
Goodbye
(
) or use the
DROP
softkey.
Note:
When receiving a page on the phone speaker, you can press
End Call,
or for 480i/CT, 9480i/CT, and all Aastra Series 5 models: press
Goodbye
(
)
to disconnect the phone from the paging service.
Wave 4.0
June 2013
