Call Park
3
-
8
Using Wave Phone Features
Wave Phone User Guide
You can only park one call on any given line. Any other phones that have a
Directed Park
button targeted at the same line where the call was parked, and are configured to show
status, will flash red, indicating that there is a call already parked on the target line.
If you leave a call parked for a long period of time, your phone rings back, and
PARK
is
displayed.
To Retrieve a Direct Park Call
Press the pre-programmed
Directed Park
button, then the extension at which the
call is parked.
If your phone does not have a programmed
Directed Park
button, press *65, then the
extension at which the call was parked.
Note:
After you dial the target extension number, either dial # to signify the end of the
number, or wait several seconds for the dialing time out.
If the Direct Park button has been programmed with an extension, it cannot be used to
retrieve a call from a different extension. You can use the *65 feature code to retrieve the
call from an extension other than the one programmed in your Direct Park button.
Contact your Wave System Administrator for more information.
ANALOG PHONES
To Direct Park a Call
With a party on the line:
1.
Press
Flash
, then
*
66.
2.
Dial the extension.
3.
Listen for two beeps.
4.
Hang up.
To Retrieve a Direct Parked Call
1.
Listen for the dial tone.
2.
Press
*
65.
3.
Dial the extension.
Wave 4.0
June 2013