18
RFSDV34 Freestanding Direct Vent Gas Stove
10003550
Log Set and Lava Rock Material Installation
Figure 27
1. Remove window frame assembly. (Refer to Window
Frame Assembly Removal section)
. Remove logs from packaging.
As with all plastic items - these logs and their
packaging are not toys and should be kept
away from children and infants.
3. Place rear log (KR10) n rear bracket (ensure log is
seated properly, leveled and centered to the unit) so
it will not move from side to side and it is firmly posi-
tioned on the bracket.
4. Slip front ember log (KR7) down behind the front de-
flector.
LG344
RFSDV
LOGS
6/04
Log Rear (KR10)
Log Top Right (KR1)
Log Top Left
(KR11)
Log Front Left
(KR8)
Log Ember
Bed (KR7)
Log Front Right (KR9)
LG344
Figure 27 -
Log Placement
5. Place front left log (KR8*) on top of burner, left side.
Using the bottom holes in the log, locate it into the left
bracket log locator studs.
6. Place front right log (KR9) on top of burner, right side.
Use log’s bottom holes to locate it into the right bracket
log locator studs.
7. Place burner lava rock on top of burner between the
ember log and the two front logs.
8. Place top left log (KR11) onto locator notches. Ensure
the log is secure.
9. Place top right log (KR1) onto locator notches. En-
sure the log is secure.
