19
RFSDV34 Freestanding Direct Vent Gas Stove
10003550
SRN/SRP Models
For units equipped with ‘HI/LO’ valves the flame adjustment
is accomplished by rotating the ‘HI/LO’ adjustment knob
located near the center of the gas control valve. (Fig.
8)
It is important to periodically perform a visual check of the
pilot and burner flames. Compare them to the pictorials
illustrated below (Fig. 9-30).
If the flame patterns appear abnormal contact a qualified
service provider for service and adjustment.
Flame Characteristics
Flame & Temperature Adjustment
Fig. 28
Flame adjustment knob.
CO105d
Fig. 29
Correct pilot flame appearance.
TSRN/TSRP Models
For units equipped with the RCSITEA control, all adjustments
are performed with the use of a remote transmitter. Refer
to instructions packaged with the transmitter or Page
in this manuals for operating instructions.
LG347
RFSDV34
log flames
6/04
Figure 30 -
Correct Burner Flame Appearance
LG347
LO
HI
FP390
FLAME ADJUSTMENT KNOB
11/21/96
Turn
counterclockwise
to increase
flame height
Turn clockwise
to decrease
flame height
FP390
CO105d
Pilot flame
6/07 djt
